|
|
 |
 |
| Powder Compaction Press for Very Small-Size or Thin Parts |
| Multipak 3-Mode Press (Pentronix) |
|
|
The multipak 3-mode presses offer three types of molding methods:
- Molding with anvil and lower punches
(for relatively simple parts which are one-sided flat)
- Molding with upper and lower punches
(for parts with multi-leveled surface on both sides)
- Molding with anvil, upper, and lower punches
(for complex shaped parts)
Double-action molding is also possible.
|
 |
Compaction pressure
2 to 31 tons |
|
The most suitable mode is easily determined on the basis of the molded part shapes and production efficiency. The mode can be easily switched between any of the three by replacing the die set (tooling setup preparation) and the cam in the press. |
|
| Features |
- Fully automatic, high-speed operation
- Easy off-line die assembly, changeover, and adjustment
- Easy mode selection and changeover
- High yields
- Minimum deviation in molded parts (weight: less than 1%, thickness: less than 25 µm)
- Vacuum system enables automatic transportation of molded parts
- High-speed multiple-cavity capability for high productivity
- Powder filling depth and molded part thickness adjustable during operation
- Sharp edges on molded parts (no back-end fabrication required)
- Virtually no burring or chipping
- Production of extremely thin molded parts possible
- High usability of tool capsule for die set
- Automatic lubrication eliminates nearly all maintenance
- Multi-level molding capability
PTX-Pentronix, Inc. Homepage
|
|
|
