| High productivity |
|
High throughput over 270 panels / hour (4.5 panles / minute) is achieved by reducing time for image processing and panel transfer. (under conditions of 2.5 seconds of exposure time and one alignment per 10 panels.) |
| Applicable to thin boards |
|
The ADEX2200P can expose board sizes up to 559 x 635mm (22 x 25 inch) including thin boards and flexible substrates down to 0.05mm. (Core thickness) |
| Consumables replacement & maintenance Schedule management |
|
The system raises alarm on the operation screen for maintenance and consumable parts replacement, once those frequencies are set initially. |
| Newly introduced contact method |
|
U contact method realizes high speed, even and stable contact between panel and artwork films. |
| Automatic job change over |
|
By just pushing the start button, the system automatically registers fiducial marks on top and bottom artwork films, camera positions and the position of XYθ stage and etc reducing time required for setup and job change over. |
| Remote suppot service |
|
Realtime support can be optionally provided with remote monitoring of touch screen and image processing screen by having an Internet connection where ADTEC Engineering's exposure systems are installed at the customer's site to connect to ADTEC Engineering's Support Center. |
